Hellow!Welcome Dongguan kddas automation equipment Co., Ltd.中文English
HotTel400-6099-808138265386990769-88035999
Products
  • Three shaft blowing type lock screw machine
    Three shaft blowing type lock screw machine

    More +
  • Four axle platform automatic lock screw machine
    Four axle platform automatic lock screw machine

    More +
  • Five axle platform automatic lock screw machine
    Five axle platform automatic lock screw machine

    More +
  • Handheld automatic lock screw machine
    Handheld automatic lock screw machine

    More +
  • Ke Di Da SiProductsDisplay case

    Name:Automatic tube formi…

    Name:Automatic tube formi…

      Voltage: 220V AC60HZ/50HZ

      Size: L360 * W380 * H430 (unit: MM)

      Weight: 32.5KG

      Efficiency: 20 seconds / tube

      Equipment Description:

      L. is suitable for transistor power crystal, triode, etc.

      Similar electronic components forming and cutting feet.

      2. small size, simple operation, easy maintenance.

      3. easy to operate and easy to maintain.

      4. tools and moulds are all imported from Japan for long life.

      5, adding the movable feed plate 2 can form the bulk J parts (need to be made)

      6. can ask the customer to request the customized mold, the different specifications of the molding requirements, the replacement of the mold can be easy to replace the mold.

      7. equipment body plate is high quality steel, strong and thick.


    Detail >

    Feedback >

    Name:Full automatic bulk …

    Name:Full automatic bulk …

      Voltage: 220VAC60Hz/50Hz

      Size: L850 * W580'H910MM

      Weight: 145KG

      Efficiency: 3600PCS/H

      Equipment Description:

      One machine can be equipped with multi - eye 1 mold, switch control, without manual vibration change.

      Photoelectric induction, segmenter positioning, high stability.

      The combination of photoelectric and electric is stable and efficient.

      Full automatic vibration feeding, 100% of Freud points arrangement.

      Two groups of photoelectric control, make the vibration disk feed high, and complete matching with the molding, so that the machine completely white movement.

      It can share the same specification LED lamp to shape and cut the foot.

      If the material is free of electricity, feet or defective products, the bad rate can be reduced by 1/1000.

      The tool and mold are imported from Japan for long life, and the adjustable foot is 2-15MM.

      Motor and electrical appliances are all imported brands in Taiwan.

      Can be customized according to customer requirements dissatisfied with.

      The body collar of the equipment is high quality, strong and thick.


    Detail >

    Feedback >

    Name:Crystal forming mach…

    Name:Crystal forming mach…

      Size: L850 * W580*H910MM

      Weight: 145KG

      Efficiency: 3600PCS/H

      Equipment Description:

      It can be equipped with a variety of moulds, switch control, without manual dismantling, O photoelectric induction, location of the divider, and high stability.

      Combination of photoelectric and electrical, stable molding, high efficiency, O fully automatic vibration feed, one hundred percent arrangement, divide the polarity,

      Two groups of photoelectric control, make the vibration disk feed high, and complete matching with the molding, so that the machine is fully automated.

      Without bending, foot or inferior, the bad rate can be less than 1/10000

      Cutting tools and moulds are used in Japan, with long life and 2-15MM adjustable feet.

      Motor and electrical appliances are all imported brands in Taiwan.

      The mold can be made according to the requirements of the customer.

      The equipment of the equipment is made of high quality steel. It is strong and thick.


    Detail >

    Feedback >

    Name:Fully automatic bulk…

    Name:Fully automatic bulk…

      Voltage: 220VAC60Hz/50Hz

      Size: L850 W580 H910MM.

      Weight: 145KG

      Efficiency: 3600PCS/H

      Equipment Description:

      One machine can be equipped with multi - mold, switch control, without manual dismantling.

      Photoelectric induction, segmenter positioning, high stability.

      The combination of photoelectric and electric is stable and efficient.

      Full white motion vibration feed. 100 percent arrangement, polarity.

      Two sets of photoelectric control, the vibration plate and forming complete with send Kegao, let the machine, fully automatic

      The bad rate can be reduced by 1/1000 if the material is no bending, foot or defective.

      Cutting tools and moulds are used in Japanese colostomy for long life. The adjustable foot length is 2-15MM.

      Motor and electrical appliances are all imported brands in Taiwan.

      Can be provided to request investigation.

      The equipment plate of the equipment is high quality, strong and thick.


    Detail >

    Feedback >

    Name:Bulk capacitor shear…

    Name:Bulk capacitor shear…

      Voltage: 220VAC60Hz/50Hz

      Size: L360. W300. H350 (unit: MM)

      Weight: 35kg

      Efficiency: 3500-4000PCS/H

      Equipment Description:

      Suitable for bulk, tube loading radial part cutting operation

      Using the plane vibration feeding mode, the material is smooth and smooth, and the size parts can be applied.

      Special cutting method, cutting tools used in Japan imported steel, long life, easy adjustment, easy maintenance.

      It is small in volume, simple in operation and easy to maintain.

      The precision of the cutting foot is high and the shortest can be cut to 3MM (shorter is required).

      The controller adopts the imported electronic components in Japan, which has long life and smooth feeding.

      The motor is the import brand of Taiwan port.

      Additional counter (product) can be added according to customer's request

      The equipment of the equipment is made of high quality steel. It is strong and thick.


    Detail >

    Feedback >

    Choose KeDiDaSi 4 reason

    For your business products carefully build the best lock screw machine

    10 years of professional quality,
    strength of the brand

    Kati Das is a modern high-tech enterprise integrating R & D, production and sales.
    Flash delivery, within 3-5 days of domestic security, 10 days abroad will be
    Scientific management, comprehensive implementation of the 6S management system, improve efficiency

    Advanced technology excellence,
    build to attain quality

    Introduce advanced technology and precision production equipment in Europe, America, Japan and Taiwan, and strictly control quality
    Automatic terminal pressing machine double line, four line, five wire at the same time processing, speed increase production efficiency with automatic twisting tin, better use of the product

    Product variety, complete
    series, stability

    10 experts in the industry to ensure the realization of the non - lock screw machine.
    16 experienced professional technicians ensure the stable operation of the equipment.

    Customer first,
    to provide quality services

    Mainframe overlong warranty 15 months, life-long maintenance, door-to-door service
    Regular return visit
    Free delivery, installation, debugging, training
    Provide free technical support at any time

    Cooperation Process

    Feedback
    Customer witnessmore +
    BYD

    BYD

    2010 has become a qualified supplier, and the qualified supplier is replaced by…

    more +
    HUAWEI

    HUAWEI

    Walk into HUAWEI in 2013

    more +
    Honor
    honor
    honor
    more +

    About us

      Ke Di Das automation equipment Co. Ltd is located in Dongguan City, Tangxia Town, No. 221 Tangxia Avenue South, convenient transportation, is a focus on the automatic screw machine and non-standard…

    more +
    QUESTIONmore +
    展开