Hellow!Welcome Dongguan kddas automation equipment Co., Ltd.中文English
HotTel400-6099-808138265386990769-88035999
Position:Home > News
Common malfunction and solution of automatic lock screw machine

Common malfunction and solution of automatic lock screw machine

Send:2017/11/29 6:11:22

  The following two problems are often encountered by a screw driver, and kdddas has summed up how to solve the problem for you:

  One, the screw can't go down, the screw is skidding

  1. Spring is not strong enough

  2, electric power is not enough to torque

  3, the depth of the Z under axial pressure is not enough

  4. Screw sucking

  Terms of settlement:

  1. Increase the strength of the spring and change the big screw into the die spring

  2

  3. Adjust the depth of Z axis

  4. Check whether the position of the screw is accurate and whether the suction nozzle is matched with the screw

  Two. The screw is sucked, and the screw is not sucked.

  1. Whether the position of the screw is accurate

  2. The fixed loosening of the feeder

  3. The inner diameter of the suction nozzle and the screw are unsuitable

  4. Does the feeder switch do not go to the position

  5. Insufficient suction

  Terms of settlement:

  1. Confirm the screw position for multiple screw confirmation

  2. Check whether the feeder is loose

  3, confirm whether the suction nozzle is appropriate, unsuitable for modification or reprocessing

  4. Confirm the screw multiple times

  5. Is the suction size suitable


Keywords:
展开